Filter By:

  • Show More Brands

  • Show Fewer Brands

Riser

Bontrager Kovee Elite 35 MTB Handlebar
$69.99
- Oversized 35mm clamp diameter offers increased strength and minimal weight - Shifter and brake lever position lines for spot-on control setup - 4 degree upsweep and 9 degree backsweep optimal for XC and trail - 40mm of cut marks on each side allow for easy width customization
Bontrager Satellite Plus IsoZone and inForm Satellite MTB Handlebar System
$69.99
Feel the difference The inForm Satellite Plus IsoZone system is the comprehensive defense against hand and wrist discomfort. By pairing integrated elastomer handlebar inserts with advanced ergonomic grips, this bar and grip combo reduces peak hand pressure by nearly 30% while reducing vibration and absorbing impact for a smoother, more enjoyable ride. Product details - Custom-butted, 6061-T6 alloy construction - IsoZone elastomer inserts offer reduced upper body fatigue - Performs best when combined with inForm IsoZone grips (included) Specifications - Backsweep: 9 deg. - Upsweep: 4 deg. - Material: Alloy - Weight: 487g
Bontrager Line 35 MTB Handlebar
$79.99
A 35mm mountain bar that maintains a forgiving ride feel and maximizes strength with minimal weight. Large and in charge Line 35 is ready for any terrain and changes what's possible on the trail. It maintains comfort and control on any ride, and an oversize clamping diameter increases strength and decreases overall bar and stem weight while ensuring a compliant, forgiving ride. Proven sweep and convenient graphic markings help dial in the perfect setup. Product details - Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter - Quad-butted, tapered wall, 7050-T6 aluminum construction - Laser-etched brake lever position lines for spot-on control setup
Bontrager Kovee Pro Carbon 35 MTB Handlebar
$129.99
- Oversized 35mm clamp diameter offers increased strength and minimal weight - OCLV Carbon construction is the benchmark for durability and light weight - Shifter and brake lever position lines for spot-on control setup - 4 degree upsweep and 9 degree backsweep optimal for XC and trail - 40mm of cut marks on each side allow for easy width customization
Bontrager Line Pro Carbon 35 27.5mm Rise MTB Handlebar
$179.99
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain. - Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight - 27.5mm high rise helps you dial in the perfect hand position - Brake and shifter lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - OCLV Carbon construction is the benchmark for durability and light weight
Bontrager Line Pro Carbon 35 MTB Handlebar
$179.99
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain. - Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight - 15mm rise helps you dial in the perfect hand position - Brake and shifter lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - OCLV Carbon construction is the benchmark for durability and light weight
Chromag OSX 35
$99.00
DH / Freeride / All Mountain Chromag utilizes the 35mm clamp size to create a wider, stronger bar in the same weight class as its 31.8 counterpart - the Fubars OSX. The OSX 35 is made from 7000 series aluminum. It provides the best strength to weight ratio possible. This is a strong bar best suited to DH/Freeride or trail riding. At 800mm it is our widest aluminum bar. Same perfect fit as the original OSX, with 25mm rise, 5-degree upsweep and 8-degree back sweep.
Dimension High-Rise
$19.99
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes. - Four rise options available from 30-100mm - AL-6061 aluminum alloy - ISO4210 Safety Tested for City/Trekking use - Not recommended for use with bar-ends or clip-on aero bars - 15-degree sweep
Dimension Mountain Handlebar 35mm Rise
$24.99
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - 35mm rise
ENVE M7 Mountain Handlebar 35mm
$169.99
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine. - Material: Carbon - Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise) - Bar Width (Max): 800mm - Bar Width (Min): 780mm - Clamp Diameter: 35mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
ENVE M6 Mountain Handlebar 31.8mm
$170.00
Simply put, it’s the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
ENVE M9 Mountain Handlebar 31.8mm
$170.00
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
FSA SLK Mountain Handlebar
$124.99
FSA's SL-K handlebar is the ultimate mix of lightweight and strong, for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both carbon and aluminum construction. The carbon helps keep the vibration to a minimum, while the aluminum core maintains its strength. The SL-K handlebar maintains XC weight with Enduro strength. With both medium 18mm rise or flat options and a solid 740mm width, this bar will help with a perfect fit, great control, and utmost performance for even the most demanding rider in mind. - Weight: 235g - Width: 740mm - Material: Carbon - Upsweep: 4° - Backsweep: 9°
Fairdale MX Bars
$29.99
The MX Handlebar offers a comfortable way to customize your bike with a bit of BMX style. The low-rise chromoly handlebar is a perfect upgrade to a Weekender Archer bike, for example. Or, put them on any bike in need of some tough chromed chromoly steel! - 7/8” (22.2mm) BMX style clamp (so you’ll need a BMX stem to use them) - 4” rise - 28” width
Origin8 Pro Urban Riser Handlebar - 25.4mm
$27.99
Origin-8's Pro Urban Riser Handlebar is a wonderful city companion. It's crafted from lightweight, durable 6061-T6 aluminum and delivers a heads-up 50mm rise that's great for keeping an eye on your surroundings. At a skinny 560mm wide, you'll have no trouble picking your way through town. And, it comes in a variety of colors to make sure your ride is the sharpest on the block.
Origin8 MX Mini Urban Handlebar
$29.99
Origin-8's MX Mini Urban Handlebar is made from lightweight, durable 6061-T6 aluminum. It provides a 75mm rise and a 600mm width, along with moto styling.
Origin8 Urban MX Riser Handlebar
$29.99
Origin-8's Urban MX Riser Handlebar is made from lightweight, durable 6061 aluminum. It provides a 60mm rise and a narrow 560mm width. A large grip surface leaves you plenty of room to move your hands or mount necessities like lights, bells, and computers.
Origin8 Pro Urban Riser Handlebar - 31.8mm
$31.99
Origin-8's Pro Urban Riser Handlebar is a wonderful ride companion. It's crafted from lightweight, durable 6061-T6 aluminum and delivers a heads-up 50mm rise that's great for keeping an eye on your surroundings. At a skinny 560mm wide, you'll have no trouble picking your way through town. And, it comes in a variety of colors to make sure your ride is the sharpest on the block.
Origin8 Pro Rise All Mountain Handlebar - 25.4mm
$32.99
Origin-8's Pro Rise All Mountain Handlebar is made from lightweight, durable 6061-T6 butted aluminum. It provides a 40mm rise with a wrist-friendly 5-degree sweep and a 625mm width.
Origin8 Rave Handlebar
$49.99
- Economical 6066 aluminum alloy mountain handlebar - 800mm width - 3 rise options - Back sweep: 7° - 310-350g (Depending on rise dimension)
Origin8 Fury Handlebars
$63.99
- AL7050 tubular alloy construction - 31.8mm clamp diameter - 800mm width - 7° back sweep - ISO-Mountain safety certified - 310-350g (Depending on rise dimension)
Origin8 Space Off Road II Handlebar
$63.99
Origin-8's Space Off Road II Handlebar is ready to explore the final trail frontier. This radical bar is crafted from lightweight aluminum and features a 50mm sweep and 37.5mm rise. But it's not just for looks — it lets you distribute your weight and hand placement in multiple ways for more control and comfort.
Origin8 Classique CargoUnit
$99.99
Origin-8's Classique CargoUnit is a fine 6061 T6-aluminum riser handlebar with a built-in basket. It's the answer to bolt-on baskets and bags that are often unstable. Because the basket is integrated into the bar, your gear rides on a secure, sturdy platform with room for groceries, a gym bag, and a couple burritos. The CargoUnit has a heavy-duty powder-coat finish, too.
Origin8 Frenzy Carbon Riser Handlebars
$159.99
- Full UD carbon construction - 31.8mm clamp diameter - 9-degree back sweep - EN-Mountain safety certification - Upsweep / Drop: 4-degree - Back Sweep / Bend: 9-degree - 200g
Profile Design Ultra FR MTB Handlebar
$41.99
Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.
Race Face Chester Handlebar
$45.99
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward
Race Face Aeffect Handlebar
$49.99
The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°
Race Face Aeffect R Handlebar
$54.99
A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°
Race Face Chester 35 Rise
$54.99
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design
Race Face Atlas Riser Handlebar
$69.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
Race Face Atlas 35 Riser Handlebar
$79.99 - $89.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
Race Face Turbine R 35 Handlebar
$79.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color
Race Face NEXT 3/4-inch Riser Carbon Handlebar
$139.99
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep; 3/4 Risers have a 4deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 20 mm - Bend: 8 deg - Weight: 175 g - Width: 725 mm
Race Face SixC 3/4 Riser Handlebar
$159.99
Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers
Race Face NEXT 1/4-inch Riser Carbon Handlebar
$169.99
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 5 mm - Bend: 8 deg - Weight: 175 g
Race Face NEXT 35 Riser Carbon Handlebar
$169.99
- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep
Race Face Next R 35 Handlebar
$169.99
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio
Race Face SixC 35 Handlebar
$174.99
Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control
Renthal Fatbar Lite Carbon Riser Bars
$155.69
- Unidirectional carbon, optimized for best stiffness and shock absorption
Renthal Fatbar Carbon
$164.95
- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
Renthal Fatbar Lite Carbon 35
$164.95
- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid
Ritchey Comp SC Rizer Handlebar
$29.95
- Butted 6061 aluminum - Double butted 6061 alloy - 35mm rise - 9 degree sweep - Width: 670mm - 25.4mm center section
Ritchey Comp Rizer Handlebar
$34.95
Ritchey's Comp Rizer Handlebar - Double butted 6061 alloy - Rise: 20mm - 9 degree sweep - Width: 740mm - 31.8mm O/S center section - Finish: BB Black - Weight: 380g
Spank Spoon Bar
$35.90
- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos
Spank Spoon 785 Bar
$49.90
The SPANK SPOON 785 handlebar is the cost effective upgrade to your cockpit. Built from MGR six series alloy the SPOON 785 Bar is rock solid in the park or on the trail. SPANK’s patented XGT taper process brings comfort and safety, while a Freeride inspired, All Mountain suitable geometry makes the SPOON 785 extremely versatile. With the SPOON 785 Bar, you can save a bit of money without sacrificing quality. Key technologies: XGT Material: MGR Six Series Alloy Weight (g): ±350 (20mm) / ±360 (40mm) Diameter (mm): 31.8 Rise (mm): 20 / 40 Length (mm): 785 Geometry (deg°): 5° up x 8.5° back Finish: shotpeen anodized, laser logos Technologies: XGT, MGR Discipline: race / freeride / trail
Spank Spike 800 Race Bar
$79.90
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
Spank Spike 777 FR Bearclaw Bar
$99.00
- Freeride handlebar, developed with Darren “Bearclaw” Berrecloth - Unprecedented stiffness and durability at an exceptionally low weight. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 747mm - KEY TECHNOLOGIES: Dual XGT, CNC Bending, Impact Ends, MGR - MATERIAL: MGR 2 series alloy - WEIGHT (g): ±340 (15mm) / ±350 (30mm) / ±390 (50mm) - DIAMETER (mm): 31,8 - RISE (mm): 15 / 30 / 50 - LENGTH (mm): 777 (Adjustable to 747) - GEOMETRY (deg°): 4° up x 8° back - FINISH: Shot peen anodized, decal logos
Spank Spike 800 Vibrocore Bar
$99.90
- DH Race tuned award winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - KEY TECHNOLOGIES: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - MATERIAL: MGR Super 6 Alloy - WEIGHT (g): ±340 (15mm) / ± 350 (30mm) / ±360 (50mm) - DIAMETER (mm): 31,8 - RISE (mm): 15 / 30 / 50 - LENGTH (mm): 800 (adjustable to 740) - GEOMETRY (deg°): 4° up x 8° back - FINISH: Shot peen anodized, decal logos
Spank Oozy Trail 780 Vibrocore Bar
$109.00
- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos
Spank Spike 35 Vibrocore Bar
$109.00
- DH and Freeride, ultra-wide, 820 length handlebar - Big and burly 35mm barclamp with increased strength and stiffness compared to conventional 35mm alloy bars - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Weight optimized and adjustable to 760mm - KEY TECHNOLOGIES: Vibrocore, Dual XGT, CNC Bending, MGR, Big-Taper(105mm) design - MATERIAL: Zirconium Doped 7-Series Alloy - WEIGHT (g): ±300 - DIAMETER (mm): 35 - RISE (mm): 25 - LENGTH (mm): 820 - GEOMETRY (deg°): 5° up x 8° back - FINISH: Shot peen anodized, decal logos
Sunlite Long Horn Cruiser Handlebar
$9.99
Chrome plated long-horn style design.
Sunlite MTB/City Handlebar (Steel)
$9.99
Sturdy steel construction with a versatile riser bar style.
Sunlite Medium Hi-Rise
$16.99 - $19.99
- Slightly shorter version of the popular hi-rise style - Available in chrome plated and black versions
Sunlite MTB/City Handlebar (Aluminum)
$18.99 - $34.99
Lightweight aluminum construction with a versatile riser bar design.
Thomson MTB Carbon Trail Handlebar
$150.00
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
TruVativ Hussefelt Comp Riserbar
$30.00
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ Stylo T20 Riserbar
$30.00
TruVativ's Stylo T20 Riderbar is crafted from butted aluminum for low weight and high strength. At 680mm wide, it gives you enough leverage to muscle your rig without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
TruVativ Hussefelt Riserbar
$46.00
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ Stylo T30 Riserbar
$46.00
TruVativ's Stylo T30 Riserbar will have you taking on climbs and descents like a champ. This butted aluminum bar is 700mm wide, to give you enough leverage to muscle your rig without weighing you down. And, the multiple rise options let you choose the perfect upright position for greater control in technical sections.
TruVativ Holzfeller Riserbar
$64.00
TruVativ's burly Holzfeller Riserbar is made from butted 7050 aluminum to take gravity-fueled abuse like a champ. This 730mm-wide bar gives you awesome leverage to muscle your rig and the rise gives you an upright position for greater control in nasty rock gardens as well as increased confidence on steep descents.
Page 1 of 2 Next page