Rims

$150.90
No words needed. Just google "EX 471 Leogang World Cup".
Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what the DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the EX 471 can cope with the most demanding trails.

$450.00
Whisky's No.9 50d rims are designed to a be a lightweight, aero, stable starting point to build exquisite wheels. They offer an aero advantage over the 30d rims, while offering a stiffer, more robust platform. Fit for long days in the saddle, cutting through the wind and hammering finish line sprints, they’re a perfect all-rounder. These disc brake-specific rims offer clean design and aesthetics. Featuring a wide inner width, they pair well with a variety of tires across the full range of drop bar pursuits. As with all rims Whisky makes, these come with tubeless valves and required tape in the box.
- Designed to be used with spoke nipple washers
- Rider weight limit: 300lbs

$80.99 - $110.99
- Deep section Urban/Fixie, Track racing rim for strength and aerodynamics
- Non-machined sidewalls for added style points

$50.00 - $65.00
Product specs:
- 36 hole count
- Front and rear specific
- 28.5mm wide
- Welded
- 20", 24"
- 395g front rim 392g rear rim
- Also available in 24", black only

$450.00
No.9 36w rims are our choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires and offer lightweight performance across the board. Available in both 27.5" and 29" sizes, these highly versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight, and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims we sell, these come with tubeless valves and tape in the box.
- Designed to be used with spoke nipple washers
- Recommended weight limit 240lbs

$129.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 28mm internal width ideal for 2.2-2.5" tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed

$185.00
HED Belgium G alloy rims make any custom wheel build that much sweeter. With 30mm external and 25mm internal widths, you can add tire volume, smoothness, and rolling speed to any bike or hub set.
All Belgium rims feature a welded rim joint, and are drilled for a standard presta valve. Spoke drilling is down the centerline of the rim (not offset). Please carefully read the specifications below to find out detailed information on the different rims we offer.
700c
- Tire Type: Clincher (tubeless compatible)
- Rim Width (External): 30mm
- Rim Depth: 24mm
- Hole Counts: 24, 28, 32
- Color: Black
- Brake Track: N/A
- Wheel Size: 700c
- Weight: 453 grams
- Max Pressure: 80psi
- ERD: 592mm
650B
- Tire Type: Clincher (tubeless compatible)
- Rim Width (External): 30mm
- Rim Depth: 24mm
- Hole Counts: 28 and 32
- Color: Black
- Brake Track: N/A
- Wheel Size: 650b
- Weight: 426 grams
- Max Pressure: 80psi
- ERD: 555mm

$129.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3'' mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed

$975.00
- True disc gravel rim
- At 330 grams, ENVE's lightest 700c tubeless rim accelerates quickly and ascends with ease
- Armed against pinch flats with the patent-pending Wide Hookless Bead, the G23 is tough and relentless on road, path, or trail
- Generous 23mm internal width, specifically conceived to meet the performance and ride quality demands of serious mixed surface cyclists.
- Rim Construction: Double wall
- Brake Type: Disc
- Tire Type: Tubeless Ready

$86.99
- Deep section Road racing, Triathlon, Commuting, Touring, Track racing, and Singlespeed rim for strength and aerodynamics
- Hollow core aluminum with machined sidewalls for improved braking

$59.99
Litehouse Rim
- Super-thick angled sidewalls to minimize the risk of damage when you hang up
- Wider cross-section to compliment modern tire widths for an optimized assembly

$71.97
Origin-8's DNZ18 is a lightweight 700 x 22c aero aluminum clincher rim. It has machined sidewalls for great braking and the spoke holes are reinforced with eyelets for durability.

$87.27
- 42mm DEEP DISH sleeved and pinned rim
- Powder coated (PC) or Anodized finish(Ano) dependent on color
- Available with Machined or Non-Machined sidewall
- 760g

$67.99 - $77.99
A true bmx classic. The Hazard Lite is respected because of its strength, reliability and light weight. Often imitated but never matched in quality or durability. The Hazard Lite is the rim of choice for some of the world’s best riders.
- Fully welded joint construction
- Directional spoke hole drilling

$127.90
You like gravel and wide tires? This is your rim.
The GR 531 is made for off-road adventures. This aluminum gravel rim with an inner width of 24mm is designed for wide, knobby tires up to 53mm. Torsion-resistant and robust, the welded rim supports a wide range of gravel use.

$59.90
This wide rim tackles bumpy sections and holds up to hard hits. Enjoy the long rides!
The sleeved aluminum gravel rim is the ideal choice for riding over gravel, roots, or small obstacles on unpaved paths. The robust, all-round rim, with its inner width of 24mm and its wide knobby tires up to 53mm, is suitable for various purposes and provides great comfort.

$450.00
No.9 36w rims are our choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires and offer lightweight performance across the board. Available in both 27.5" and 29" sizes, these highly versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight, and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims we sell, these come with tubeless valves and tape in the box.
- Designed to be used with spoke nipple washers
- Recommended weight limit 240lbs

$89.99
The Ribcage has been one of the only rims to have true design breakthroughs in the last few years, since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesnt say G-Sport on the rim, don't expect it to perform like a G-Sport rim.
The Ribcage is a light weight rim that can take anything you throw at it. With the ribcage the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for us in an on-site foundry . At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. GSport offers rims in HARD anodized finishes rather than the decorative anodizing used by most companies. All of these advantages create the premier rim, but do effect the cost.
TECHNICAL SPECIFICATIONS
- Sizes: 20" Only
- Drillings: 36 and 48
- Weight (Hard Anodised): 500g /17.6oz
- Weight (Chrome Plate): 540g / 19oz
- Width: 36mm ERD: 389

$59.90
This wide rim tackles bumpy sections and holds up to hard hits. Enjoy the long rides!
The sleeved aluminum gravel rim is the ideal choice for riding over gravel, roots, or small obstacles on unpaved paths. The robust, all-round rim, with its inner width of 24mm and its wide knobby tires up to 53mm, is suitable for various purposes and provides great comfort.

$150.90
A 25mm welded rim made for the demands of AM.
Lightweight rims as wide as most downhill rims were just a couple of years ago? State-of-the-art materials and extensive testing make it possible. DT Swiss knows exactly how light it can design a product to fulfill its purpose to perfection. This is why the XM 421 is as light as an All Mountain rim can get, yet still fears no trail, no matter what rock gardens it has on the menu.

$150.90
No words needed. Just google "EX 471 Leogang World Cup".
Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what the DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the EX 471 can cope with the most demanding trails.

$150.90
Strong and lightweight welded AM rim in 30mm inner with modern tires.
Riders who like the idea of giving their tires some extra volume and support will find the ideal partner with the XM 481. Its full 30mm of inner width combined with a minimal hook and perfect tubeless compatibility make it ready to tackle all demanding trails, both up and down the mountain.

$105.90
A sleeved AM rim, supporting modern tires with its 30mm inner width.
Just wide enough, just light enough. With a 30mm internal rim width, the M 502 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest of terrains. DT Swiss's benchmark rim material is combined with an economic sleeve-junction to offer the best ratio between low weight, big width, and a low price.

$127.90
An unexpected rough section on your ride? No problem with this rim.
Looking for a bomb-proof rim to build up your Gravel, Cyclocross, or adventure bike? Then it's definitely worth taking a look at the RR 521 rim. 32mm deep and 20mm wide, this modern road rim could have been classified as a Cross Country rim just a few years ago. Nowadays it's just a great offer to widen your ride... with drop bars.

$127.90
The reliable rim with an ideal price-to-performance ratio!
A state-of-the-art, high-quality aluminum rim, making for the perfect upgrade on any road bike. That is what the new RR 421 rim is all about. The welded rim supports wider tires and still offers a super-lightweight wheel build-up.

$150.90
A 25mm welded rim made for the demands of AM.
Lightweight rims as wide as most downhill rims were just a couple of years ago? State-of-the-art materials and extensive testing make it possible. DT Swiss knows exactly how light it can design a product to fulfill its purpose to perfection. This is why the XM 421 is as light as an All Mountain rim can get, yet still fears no trail, no matter what rock gardens it has on the menu.

$127.90
Our lightest alloy rim with welded, advanced rim profile!
The most advanced alloy existing for rims meets the most advanced rim profile to form the RR 411 rim. From the moment the alloy is melted, all the way to the secret surface treatment, this rim is all about getting the absolute best out of the great, shiny metal that is aluminum. Very light, very strong, and very classy is the result.

$127.90
As versatile as it is robust—a rim for all surfaces!
Anyone wanting to build a reliable, super-stiff wheel is starting in the right place with the RR 511. Thanks to a state-of-the-art alloy and surface treatment, this extremely robust 32mm high semi-aero rim is lighter than you would think. And, those thinking of using it on Gravel or Cyclocross courses can easily install tubeless tires.

$73.99
- Size : 700c
- Model : Race
- Holes : 24
- ERD : 596mm
- Color : Black
- Finish : Anodized
- Type : Tubeless/Clincher
- Valve : Presta
- FT/RR/PR : Rear
- Rim : Asymmetric
- Weight : 465g

$99.99
- A high performance alloy rim designed for freeride, race and downhill use
- Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place
- 32 holes with an inner width of 28mm and outer width of 33mm to optimize tire spread and enhance traction
- The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material
- Shotpeen finish to increase fatigue life and make it more durable
Page 1 of 3
Next page